Private-Label Buyer Guide
Artwork and sample guide · September 9, 2026
Turn the visible “LOGO” position into a traceable brief covering artwork, method, placement, dimensions, color, MOQ and physical-sample approval.
Approve a custom cuff logo by confirming the artwork, logo method, placement, finished size, thread color and contrast on a physical sock sample. Check readability on the ribbed cuff in both relaxed and worn conditions, then sign off the approved sample before bulk production. MOQ depends on the confirmed logo method and order structure.
A logo-position image is useful because it makes the intended branding area visible. It is still the beginning of the production brief—not evidence that a specific artwork, size, method or thread color has already been approved.
Keep the image as a customization cue, then connect every production decision to an artwork file, quotation, physical sample and named approver.
1 · Read the image correctly
This distinction lets the image communicate customization without pretending that the buyer artwork or production result already exists.
The navy ribbed crew presentation shows a large cuff position and a smaller toe position. The cuff is the main branding message for this product direction.
The physical sock must be sampled with the buyer artwork before the page or order presents it as a finished logo execution.
2 · Approval map
Use this table to prevent a mockup or chat message from becoming the final specification by accident.
| Logo decision | Buyer supplies | UPILATE confirms | Physical-sample check | Approval record |
|---|---|---|---|---|
| Artwork | Vector logo or high-resolution source | File usability and production version | Shape and small-detail readability | Approved artwork/version |
| Logo method | Preferred appearance | Suitable jacquard or embroidery route for the construction | Surface, edge and hand feel | Approved method |
| Cuff placement | Preferred side and position | Production position and cuff clearance | Alignment on relaxed and worn cuff | Approved placement |
| Finished size | Desired visual scale | Feasible width and height | Readability and proportion | Approved dimensions |
| Thread color | Brand color reference | Available matching direction | Contrast against the navy knit | Approved color reference |
| Order block | Pairs per logo × color × size | Applicable MOQ and quotation | Not a performance check | Commercial approval |
3 · Logo method
The MOQ below is confirmed project policy. The final method still depends on the selected construction, artwork and physical sample.
Knitted / jacquard direction
Jacquard-logo planning starts from 50 pairs per logo, color and size. Review small details, finished logo size, color contrast and how the design sits within the rib-knit cuff.
Embroidery direction
Embroidery planning starts from 100 pairs per logo, color and size when the cuff construction is suitable. Check stitch coverage, inside finish, hand feel, alignment and bulk consistency on the approved sample.
Order structure
MOQ is calculated for one logo × one sock color × one size. Do not promise free mixing across colors or sizes unless the quotation explicitly confirms it.
Sample control
Record the artwork version, method, dimensions, thread reference, placement and dated sample. The approved record should control bulk production and future reorders.
4 · Physical sample
A screenshot can approve direction. Only the physical sample can confirm the produced appearance on the ribbed cuff.
Cuff-logo sample checklist
Visual approval does not prove wash durability or performance. Those claims need a defined method and actual result.
5 · First inquiry
You do not need to complete a long factory form. Send what is available and let the remaining items stay visibly open.
| Brief section | What to send | What UPILATE confirms |
|---|---|---|
| Logo artwork | Vector file or highest-resolution source and proof of use rights | Usability, production version and any simplification need |
| Placement | Cuff side, preferred position and visual reference | Clearance, alignment and feasible placement |
| Logo appearance | Preferred size, thread color and jacquard/embroidery direction | Method, feasible dimensions and color route |
| Sock direction | Navy crew reference, size plan and any construction exception | Construction, production size chart and sample route |
| Order block | Pairs for each logo × color × size combination | MOQ, quotation and production breakdown |
| Grip and packaging | Grip material/pattern preference, pack format and destination | Feasibility, tooling need, packing terms and schedule |
Cuff-Logo FAQ
These answers support planning and do not replace the final artwork proof, quotation or physical sample.
Yes. Send the artwork, preferred side, placement, size and color direction. UPILATE confirms the appropriate logo method, MOQ and physical-sample route after reviewing the sock construction.
No. It is an intentional position demonstration. The finished buyer artwork, method, dimensions, color and placement must be confirmed through the approval process.
Jacquard-logo planning starts from 50 pairs and embroidery from 100 pairs, calculated per logo, sock color and size. Final feasibility and order structure appear on the quotation.
Yes. Choose standard rubber or premium silicone and approve the pattern, full-sole layout, color and edge spacing separately. A custom sole mold starts from 100 pairs plus a mold fee.
After the buyer approves the artwork, logo method, dimensions, placement, thread color, size chart, grip artwork, physical sample, packaging, order breakdown and commercial terms.
Ready to review the artwork?
Share the available files and order plan. UPILATE will confirm the missing method, size, color, MOQ, sample, grip and packaging decisions before quotation.
